Analog speedometer

Beautifully shaped, high quality analog speedometer in a flat black stainless steel cup. It can replace the standard speedometer and is approved by the TÜV. A montage set is included. The speed gauge goes up to 220kn/h and is lit.

Technical Data

build-in diameter 60mm; outer diameter around the upper rim: 66.5mm; height without cables: 53mm; speedometer cable connection (fits almost all models); square connection for cable around 2.5mm x 2.5mm

Informations for Assembling

If you are not sure which translation your motorbike has, then you can find out for yourself if the instrument is showing the correct speed. The K-value can be determined as follows: measure the volume of the wheel. Unscrew the cable from the speedometer. Turn the wheel round 10 times whilst counting the rotations with the visible square. Calcution: K=10 x rotations of the square divided by the volume of the wheel in cm. Round the answer down to one decimal place (there normally are only speedometers with K-values o1.0 and 1.4)